GIRADISCHI ANALOGICO CON TRAZIONE A CINGHIA COMPLETAMENTE AUTOMATICO, CON FACOLTA` D’USO IN MODALITA` MANUALE – RIPRODUZIONE 33 E 45 RPM – PREAMPLIFICATORE PHONO MM / MC INTEGRATO – BRACCIO BILANCIATO PIVOT PER I MOVIMENTI VERTICALI E CON CUSCINETTI A SFERA RADIALI PER QUELLI ORIZZONTALI, DOTATO DI LEVA DI SOLLEVAMENTO A SMORZAMENTO IDRAULICO – COMPLETO DI HEADSHELL PORTATESTINA UNIVERSALE RIMOVIBILE AT-HS3 E TESTINA MM AT91R – CAVO L/R SBILANCIATO RCA INCORPORATO E LIVELLO D’USCITA “LINEA” OPPURE “PHONO” IMPOSTABILE MEDIANTE SELETTORE – CONTROLLI DI REGOLAZIONE DEL BILANCIAMENTO DEL BRACCIO, DEL PESO DI LETTURA, DELL’ANTISKATING E DELL’OVERHANG – BASE CON STRUTTURA SMORZANTE E PIATTO ANTIRISONANTE IN ALLUMINIO PRESSOFUSO – TAPPETINO ANTIVIBRAZIONI IN GOMMA DI SPESSORE 4,5 MM – CAPPA DUST COVER IN DOTAZIONE – FINITURA BLACK (NERA) – DIMENSIONI (L X A X P) 435 X 128 X 353 MM – PESO 5,2 KG
ADVANCED FULLY-AUTOMATIC BELT-DRIVE TURNTABLE
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Balanced straight tonearm with hydraulically damped lift control and lockable rest
Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
Switchable modes for moving magnet and moving coil cartridges
AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
Damped base construction for reduced low-frequency feedback colouration
MM / MC CARTRIDGE SELECTOR SWITCH
Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.
AT91R DUAL MOVING MAGNET CARTRIDGE
Specially designed for the LP3, the AT91R Dual Moving Magnet™ phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.
UNIVERSAL HEADSHELL
Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2″ mount cartridges and 4-pin turntable arms.
BALANCED TONEARM
Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.
4.5MM PLATTER MAT
TurntableType Fully Automatic, Belt-DriveMotor DC motorSpeeds 33-1/3 RPM, 45 RPMTurntable Platter Die-cast aluminiumWow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHzSignal-to-Noise Ratio > 60 dBOutput Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/secPhono Pre-Amp Gain 36dB nominal, RIAA equalised56dB nominal, RIAA equalisedPower Supply Requirements 220 to 240 V / 50, 60 HzPower Consumption 2WDimensions 435 mm ×353 mm×128 mm (W×D×H)Weight 5.2kgAccessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cableCartridge & StylusModel AT91RType VM Dual MagnetOutput Voltage 3.5mV (mV at 1kHz, 5 cm/sec)Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)Stylus Construction 0.6 mil bonded conicalCantilever Aluminium pipeRecommended Load Impedance 47,000 ohmsWeight 5.0gHeadshellModel AT-HS3Weight 11.1gOverhang Adjustment 8mmTone armType Static balanced straight shaped with soft damping controlEffective Length 221.5mmOverhang 19mmMaximum Tracking Error Angle Less than 3°Stylus Pressure Adjustment Range 1 to 4gApplicable Cartridge Weight 14.5 to 20gAnti-skating Range 0 – 3 g